The Schneider Electric A9F92470 is a compact Acti9 iC60L miniature circuit breaker rated at 0.5 A. Its four-pole construction and Z tripping curve make it suitable for circuits requiring sensitive protection against overload and short-circuit conditions.

A9F92470 at a Glance

This four-pole MCB uses thermal-magnetic protection and is designed for AC/DC networks. It has a 15 kA rated short-circuit capacity at 400 V AC according to IEC/EN 60898-1, while the Icu reaches 100 kA at 220–240 V AC under IEC/EN 60947-2.

Protection Characteristics

0.5 A Rated Current

The low 0.5 A rating makes the A9F92470 suitable for circuits where precise current protection is required. Final selection should consider the connected equipment and conductor characteristics.

Sensitive Z Curve

The Z characteristic provides a low magnetic tripping threshold, allowing rapid response to short-circuit conditions. This makes the device appropriate for sensitive electrical circuits.

Four Protected Poles

All four poles are protected, providing coordinated protection across multi-conductor circuits while allowing simultaneous switching of the associated conductors.

Installation and Panel Integration

The A9F92470 is designed for DIN-rail installation and occupies four module positions, giving it a width of 72 mm. Its 85 mm height and 78.5 mm depth fit the standard modular format of the Acti9 range.

Status Indication and Maintenance

VisiTrip provides a mechanical indication when the breaker trips because of an electrical fault. VisiSafe also provides a clear visual indication of the contact position, supporting safer maintenance procedures.

Where the A9F92470 Fits Best

Sensitive Control Circuits

The 0.5 A rating and Z curve make this model suitable for applications where low-current circuit protection is required.

Industrial Distribution Panels

Its four-pole configuration allows integration into modular industrial distribution equipment.

Equipment Protection

The A9F92470 can be used where connected electrical equipment requires a dedicated low-current protective device.

Selecting the A9F92470 for an Installation

The combination of 0.5 A rated current, four protected poles and Z-curve operation distinguishes this model from higher-current iC60L variants. Correct coordination with the protected circuit remains essential for reliable operation.

A9F92470 Purchase Information

The Schneider Electric A9F92470 is available for applications requiring four-pole, low-current circuit protection. Quantity and project requirements can be considered when requesting a quotation.

A9F92470 Price

The final price depends on order quantity and commercial conditions. A quotation can be prepared based on the required quantity.

Common Questions About A9F92470

Is A9F92470 a 70 A breaker?

No. Despite the product reference ending in 470, its rated current is 0.5 A.

How many poles does A9F92470 have?

It has four protected poles.

Which tripping curve is used?

The breaker uses a Z tripping characteristic.

What is its short-circuit capacity?

The Icn is 15 kA at 400 V AC, while the Icu reaches 100 kA at 220–240 V AC according to the applicable IEC/EN 60947-2 specification.

Can the A9F92470 be mounted on a DIN rail?

Yes. It is designed for DIN-rail installation.

Final Overview

The Schneider Electric A9F92470 is a four-pole, 0.5 A Acti9 iC60L miniature circuit breaker with Z-curve protection. Its sensitive tripping characteristic, compact modular design and high short-circuit performance make it a suitable choice for dedicated low-current protection applications.