All Categories

Product Catalogue

Download Product Catalogue

100% Genuine Products

Supplier of industrial electrical products

1 year warranty

The products have a warranty

METSEDM1110

5/5 - (5 votes)

EasyLogic – Digital Panel Meter DM1000 – Ampermeter – single phase

Main documents

Main
Range EasyLogic
Product name EasyLogic DM1000
Device short name DM1110
product or component type Ammeter
Device application GenSet
Load control
Test laboratories
Complementary
poles description 1P + N
type of measurement Current
[Us] rated supply voltage 100…230 V AC +/- 20 %
100…230 V DC +/- 20 %
Supply frequency 50/60 Hz +/- 5 Hz
Network frequency 50 Hz
60 Hz
Maximum power consumption in VA 3 VA at 230 V AC
Display type LED
Display digits 4
full scale display 999.9
Control type Selector switch built-in
Analogue input type Current 0…5 Asingle phase
Measurement current 1/5 A, 50…6000 mA AC, 50/60 Hz +/- 5 Hz
Accuracy Current +/- 0.5 % of full scale for class 0.5
device mounting Flush
mounting support Panel
Type of installation Indoor
Measurement category Category III
Standards IEC 61326
Product certifications CE conforming to IEC 61010-1
Environment
Electromagnetic compatibility Conducted and radiated emissions class A conforming to CISPR 11
Electrostatic discharge conforming to IEC 61000-4-2
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
Surge immunity test conforming to IEC 61000-4-5
Conducted RF disturbances conforming to IEC 61000-4-6
Magnetic field at power frequency conforming to IEC 61000-4-8
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Harmonics conforming to IEC 61000-3-2
Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3
IP degree of protection Front panel: IP50
Body: IP30
Relative humidity 5…95 %
Pollution degree 2
Ambient air temperature for operation -10…60 °C
ambient air temperature for storage -25…70 °C
Colour Black
Width 96 mm
Height 96 mm
Depth 38 mm
Cut-out dimensions 92 x 92 mm
net weight 175 g
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.6 cm
Package 1 Width 11.2 cm
Package 1 Length 12.4 cm
Package 1 Weight 265 g
Unit Type of Package 2 S03
Number of Units in Package 2 24
Package 2 Height 30 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 6.89 kg
Product Description

Schneider Power Meters

Frequently Asked Questions

Push button switches can be classified as either normally open (NO) or normally closed (NC). Normally open (NO) switches, also known as "OFF" position switches, complete the circuit when actuated. In contrast, normally closed (NC) switches, or "ON" position switches, break the circuit when actuated. Understanding the difference between NO and NC push button switches is crucial for selecting the right type for your application, whether it's for industrial machinery, control panels, or electronic devices.

Push button switches come in two main types: single-pole and double-pole switches. The single-pole switch is the most common type, featuring a control device with a single input source and a single output source. This basic design makes single-pole switches ideal for a wide range of applications. Double-pole switches, on the other hand, have two input sources and two output sources, offering more complex control capabilities for advanced electrical systems.

No, a push button is not an analog sensor. An analog sensor provides a continuous output signal that varies in proportion to the measured quantity. In contrast, a push button provides a discrete output signal that changes state from one level to another when the button is pressed or released. This distinction makes push buttons ideal for applications requiring simple on/off control, unlike analog sensors that are used for more complex, variable measurements.

✅ A push button consists of several key components:

1. Button Actuator: This is the part you physically press. It is connected to an internal mechanism within the switch.

2. Contacts: Push button switches contain one or more sets of contacts, typically made from conductive materials like metal. In their default state, these contacts are separated.

When the button actuator is pressed, it moves the contacts together to complete an electrical circuit. This simple yet effective design is what makes push buttons reliable for various applications, from industrial machinery to everyday electronic devices.

A push button is a digital sensor. Unlike analog sensors, which provide a continuous range of values, digital sensors like push buttons have only two states: on or off. For example, when you press a push button, it changes from off to on, providing a discrete signal. Similarly, a digital light sensor can detect whether it is dark or bright, also giving a binary output. This clear distinction makes push buttons ideal for simple, straightforward control in various applications.

Reviews

There are no reviews yet.

Be the first to review “METSEDM1110”

Your email address will not be published. Required fields are marked *

Start typing to see products you are looking for.